Restore Factory Default Setting - Grandstream Networks HT701 User Manual

R F
ESTORE
WARNING! Restoring the Factory Default Setting will DELETE all configuration information of the phone.
Please BACKUP or PRINT out all the settings before you approach to following steps. Grandstream will not
take any responsibility if you lose all the parameters of setting and cannot connect to your VoIP service
provider.
FACTORY RESET
There are three (3) methods for resetting your unit:
Reset Button
Reset default factory settings following these four (4) steps:
1. Unplug the Ethernet cable.
2. Locate a needle-sized hole on the back panel of the gateway unit next to the power
connection.
3. Insert a pin in this hole, and press for about 7 seconds.
4. Take out the pin. All unit settings are restored to factory settings.
IVR Command
Reset default factory settings using the IVR Prompt (Table 5):
1. Dial "***" for voice prompt.
2. Enter "99" and wait for "reset" voice prompt.
3. Enter the encoded MAC address (Look below on how to encode MAC address).
4. Wait 15 seconds and device will automatically reboot and restore factory settings.
Encode the MAC Address
1. Locate the MAC address of the device. It is the 12 digit HEX number on the bottom of the unit.
2. Key in the MAC address. Use the following mapping:
0-9: 0-9
A:
B:
C:
D:
E:
F:
For example: if the MAC address is 000b8200e395, it should be keyed in as "0002228200333395".
Reset from web interface (Reset Type)
1. From the Advanced Settings Page user can select three types:

Full Reset: This will make a full reset

ISP Data: This will reset only the basic settings, like IP mode, PPPoE and Web port

VOIP Data: This will reset only the data related with a service provider like SIP server, sip
user ID, provisioning and others.
NOTE:
Factory Reset will be disabled if the "Lock keypad update" is set to "Yes".
1.
2.
If the HT70X was previously locked by your local service provider, pressing the RESET button will only
restart the unit. The device will not return to factory default settings.
Grandstream Networks, Inc.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
D
ACTORY EFAULT
22 (press the "2" key twice, "A" will show on the LCD)
222
2222
33 (press the "3" key twice, "D" will show on the LCD)
333
3333
HT-70X User Manual
Firmware Version 1.0.0.18
S
ETTING
Page 35 of 35
Last Updated: 03/2012