Preferred Vocoder (Codec) - Grandstream Networks HT701 User Manual

Ht70 series analog telephone adaptor
Hide thumbs Also See for HT701:
Table of Contents

Advertisement

P
VOCODER (C
REFERRED
The HT70X supports a broad range of voice codecs. Under Profile web pages, choose your preferred
order of different codecs:
PCMU/A (or G711µ/a)
G729 A/B/E
G723.1
G726 (16/24/32/40)
iLBC
Table 8: Basic Settings
End User Password
Web Port
Telnet Server
IP Address
DHCP hostname
DHCP domain
DHCP vendor class ID
PPPoE account ID
PPPoE password
PPPoE Service Name
Preferred DNS server
Time Zone
Grandstream Networks, Inc.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
)
ODEC
Password to access the Web Configuration Menu. This field is case sensitive with a
maximum length of 25 characters.
By default, HTTP uses port 80. This field is for customizable web port.
Default is set to YES.
There are two modes to operate the HT70X:
DHCP mode: all the field values for the Static IP mode are not used (even though they
are still saved in the Flash memory.) The HT701 acquires its IP address from the first
DHCP server it discovers from the LAN it is connected. Using the PPPoE feature: set the
PPPoE account settings. The HT70x will establish a PPPoE session if any of the PPPoE
fields is set.
Static IP mode: configure the IP address, Subnet Mask, Default Router IP address,
DNS Server 1 (primary), DNS Server 2 (secondary) fields. These fields are set to zero by
default.
Default is blank. This option specifies the name of the client. This field is optional but may
be required by some Internet Service Providers.
Default is blank. This option specifies the domain name that client should use when
resolving hostnames via the Domain Name System.
Default is HT7XX. Used by clients and servers to exchange vendor-specific information..
PPPoE username. Necessary if ISP requires you to use a PPPoE (Point to Point Protocol
over Ethernet) connection.
PPPoE account password.
Default is blank. This field is optional. If your ISP uses a service name for the PPPoE
connection, enter the service name here.
The preferred DNS Server to be used
Controls how the date/time is displayed according to the specified time zone.
HT-70X User Manual
Firmware Version 1.0.0.18
Page 18 of 35
Last Updated: 03/2012

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ht702Ht704

Table of Contents