Rear Panel Physical Layout - Alesis Performance Pad Pro Reference Manual

REAR PANEL PHYSICAL LAYOUT

1. DC IN – The supplied power adapter should be connected to a live outlet to power the unit.
2. ON/OFF SWITCH – This switch turns the unit on and off.
3. VOLUME – This knob controls the overall volume of the PerformancePad Pro.
4. ¼" TS RIGHT / LEFT OUTPUTS – These ¼" connections will output the audio from the
PerformancePad Pro. Connect these outputs to an amplifier or a speaker system. For
mono sound, you can connect only one output.
5. PHONES – Connect headphones to this output for quiet practicing.
6. MIDI OUT – Use a five-pin MIDI cable to connect the MIDI OUT of the PerformancePad Pro
to the MIDI IN of an external MIDI device.
7. STEREO IN – You can connect an external audio device (MP3 player, computer, etc.) to
this input using a 1/8" stereo cable.
8. KICK / HI-HAT FOOTSWITCH INPUTS – You can connect a 1/4" TS footswitches (sold
separately) to these inputs to trigger the kick or hi-hat sounds on the PerformancePad Pro.
7
4 4
5
3
8
8 8
6 1 2