11. Exit: Press this button to cancel your selection or to exit a submenu.
12. Dial: Turn this dial to adjust the setting of the currently selected item in the display
(number values, kits, songs, etc.). Alternatively, use the Left () and Right () buttons.
13. Click: Press this button to activate or deactivate the built-in metronome ("click"). When
you activate it, the Metronome settings will also appear in the display, which you can
adjust. See
Operation > Metronome
14. Song: Press this button to access the Song Selection page in the display. See
> Songs
to learn more.
15. Kit: Press this button to access the Kit Selection page in the display. See
Kits
to learn more.
16. Save: Press this button to save the settings of the current kit. See
learn more.
17. Tempo: Press this button to view the current tempo in the display. See
Metronome
to learn more.
18. Record: Press this button to record-arm the drum module. To start recording, hit a drum
pad, press Enter, or press Start/Stop. To cancel recording, press Exit or Record. See
Operation > Songs
19. Start/Stop: Press this button to play or stop a song. When the drum module is record-
armed, press this button to start recording.
20. Left (): Press this button to decrease the value of the selected item (or move to the
previous setting) in the display. Alternatively, turn the dial.
21. Right (): Press this button to increase the value of the selected item (or move to the next
setting) in the display. Alternatively, turn the dial.
Rear Panel
1. Phones Output: Connect 1/8" (3.5 mm)
stereo headphones (sold separately) to this
input. Control the volume by turning the
Phones Volume knob on the top panel.
2. Aux Input: Connect an additional audio player
(smartphone, tablet, etc.) to this input using a
standard 1/8" (3.5 mm) stereo/TRS cable. The
sound will be mixed with the drum module's
sounds.
3. Outputs: Connect your audio interface, mixer, powered monitors, etc. to these outputs
using standard 1/4" (6.35 mm) TRS cables.
4. Crash Trigger Input: Connect an optional cymbal pad to this input using a standard 1/4"
(6.35 mm) TS cable. Hitting the pad will trigger an additional crash cymbal sound.
5. Tom 4 Trigger Input: Connect an optional drum pad to this input using a standard 1/4"
(6.35 mm) TS cable. Hitting the pad will trigger an additional low tom sound.
6. MIDI In: Connect an external MIDI device (sequencer, drum machine, etc.) to this input
using a standard 5-pin MIDI cable.
7. MIDI Out: Connect an external MIDI device (synthesizer, sound module, etc.) to this
output using a standard 5-pin MIDI cable.
8. USB MIDI Port: Connect this USB port to a computer using a standard USB cable. The
drum module will send MIDI messages to your computer over this connection.
4
to learn more.
to learn more.
Operation > Kits
5
8
6
7
Operation
Operation >
to
Operation >
2
4
1
3
3