Alesis Performance Pad Pro Reference Manual page 35

Removing a Fill from Your Song
While in Record mode, there are two ways to remove a Fill from a Song:
When the Fill step appears, press the A button for an A Pattern or press the B button
for a B Pattern and the Fill will be removed.
When the Fill step appears, press and hold the FILL button and press ERASE.
Inserting a New Step Between Two Existing Song Steps
1. The PerformancePad Pro should be in Step Edit Mode.
2. Use the PAGE UP / DOWN buttons to
select the step number that the inserted
step should occupy. For example, to
insert a step after step 04, select step
05.
3. Press and hold SAVE / COPY, and
keep holding it down until step (6). You
should see the screen shown on the
right.
4. Enter the two-digit Pattern number to be
inserted.
5. Press REC (ENTER). The new step is inserted, and all subsequent steps are
automatically renumbered to reflect the addition of the inserted step (e.g., what used to
be step 05 is now step 06, what used to be step 06 is now step 07, etc.).
6. Release the SAVE / COPY and REC (ENTER) buttons.
Deleting a Step
1. The PerformancePad Pro should be in Step Edit Mode.
2. Use the PAGE UP / DOWN buttons to select the step number to be deleted.
3. Press and hold ERASE. You will see
the screen shown on the right.
4. While continuing to hold ERASE, press
REC (ENTER). The step is deleted, and
all subsequent steps are automatically
re-numbered to reflect the deletion of
the inserted step (e.g., what used to be
step 06 is now step 05, what used to be
step 07 is now step 06, etc.).
5. Release the ERASE and REC (ENTER)
buttons.
Replacing a Step
1. The PerformancePad Pro should be in Step Edit Mode.
2. Use the PAGE UP / DOWN buttons to select the step number to be replaced.
3. Enter the new Pattern number (with appropriate A or B, Fill, or User/Preset options).
35