Zone Control; Space Enhancer - Kenwood DNX7140 Instruction Manual

Zone Control
I
i
You can set the front and rear audio source.
I
D
Display the Zone Control screen
Touch
[.J >
[~]
>
[Zone Control). (page 59)
D
Set the Zone Control
[Single Zone] Turns off the dual zone.
[Front Source] Sets the front audio source.
[Rear Source] Sets the rear audio source.
~
~
When the rear speaker sound is switched, the audio
source that is output at the AV OUTPUT terminal is
also switched to the same source.
[Rear VOL.] Adjusts the volume of the rear
channel.
~
~
. There are following limitations when zone function is set
to
"ON".
- There is no output from the subwoofer.
- <Equalizer Control> (page 60), <Space Enhancer> (page
61), <Position> (page 62), <OSP Bypass Control> (page
78), <Speaker Setup> (page 78), and <Car Type (DTA)
Setup> (page 79) are not available.
Space Enhancer
You can enhance the soundscape.
D
Display the Space Enhancer screen
Touch [et]
>
[~]
>
[Space Enhancer] (page
59)
II
Set the Space Enhancer
[] Sets the soundscape level.
@
• You cannot set Space Enhancer in tuner source
English.61