Kenwood DNX7140 Instruction Manual page 62

Audio Control
Position
You can adjust the sound effects according to
your listening position.
D
Display the Position screen
Touch [8]
>
[«&]
>
[Position]. (page 59)
D
Set the Position Control
[Pl] - [P3]
Stores the present adjustment setup
in
memory, or calls it from memory.
To store your adjustment in memory:
Continue to touch [P1] to [P3] more than 2
seconds.
To call your adjustment from memory:
Touch [P 1] to [P3] of your adjustment you
wish to call from memory.
[.....],
[~]
Sets a listening position.
You can select any of "Front R" (Right front),
"Front L" (Left front), "Front All" (All front), and
"All" (All) positions.
[DTA] Displays the Position DTA (Digital Time
Alignment) screen.
D
Exit Position Control
OTA
l!l!!!!! ....
Ridgeview.Ro_a_d_ _
~
. 99999
Q
~
• The final distance is adjusted to the total of Car Type Set
Up value (page 79) and Position Setup (both Position and
Position Fine Control) value.
• If you change the Car Type Set Up value (page 79), the
position is set to "All".
• Only the adjusted distance of position setup (Position
and Position Fine Control values) is stored in memory.
Therefore, the final adjustment distance changes if you
change the Car Type Set Up value (page 79).
62 DNX7140/DNX7000EX/DDX714/DDX7034BT
Position DTA Control
You can fine-adjust your listening position.
D
Display the Position DTA screen
• orA ~
l!l!!!!! ,....
Rid~evi:~
Road .
9999.99~
D
Select a speaker you wish to adjust
IT]
Left front speaker
[1J
Right front speaker
IJJ
Left rear speaker
@] Right rear speaker
rn
Subwoofer
[.....],
[~]
Finely adjusts the value set with the
Position function.
[TotaIDTA] Indicates setup distance. The
adjusted distance (Position and Position Fine
Control values), and the total of the distance
adjusted by Car Type Set Up (page 79) and
the adjustment distance for position setup are
indicated.
D
Finely adjust the distance
_.~
~
.'0
:
..
Finely adjust the value set with the Position
function.