Making A Call Using Call Records; Calling By Voice Recognition - Kenwood DNX7140 Instruction Manual

Making a Call Using Call Records
II
Display the Voice Recognition screen
Calls by selecting a phone number from the
outgoing, incoming, or missed calls list.
D
Display the Hands-Free Control screen
See <Making a call> (page 51).
II
Display the Outgoing Calls, Incoming Calls,
or Missed Calls screen
D
Select from calls list
Example: Outgoing Calls screen
Preset3 Direct Number
Voice . -
mm ,.
Ridgeview Road 99999 99
~
D
Say the name registered in the Phonebook
When a beep is heard, say the name within 2
seconds.
When a beep is heard, say the category within
2 seconds.
If there are more than one phone numbers
registered under the same name, go to step 4.
II
Select a Phone number category
~
~
Phon oak
mm ,.
Rldgevlew.R0a _.
99999.99~
The Outgoing Calls list screen, Incoming Calls list,
or Missed Calls list screen shows the list of the calls
originated from or received at this unit. They are not the
ones stored in the cell-phone memory.
A
~
~"
r
;t
KENWOOD Oeslc:n
~
03-5,(57-7121
ii1
KENWOOD DesIgn
03-5451-1121
Calls the selected phone number.
II
Make a call
Calling by Voice Recognition
Calls by recognizing the registered voice.
A
~
In order to perform voice recognition, voice must
be registered in the Phonebook data. See <Voice
Registration> (page 55) Or, to perform voice recognition
by Phone number category (Home, Office, Mobile etc.)
of Phonebook data, a key word voice must be registered.
See <Key Word Voice Registration> (page 56)
D
Display the Hands-Free Control screen
See <Making a call> (page 51).
Selects the Phone number category.
IJ
Make a call
• w
I KENWOOD - -
_I
rib
0426466111
~
Home 0426465116 - Record
~
~
A message is displayed if the voice is not recognized.
Read the message for the further operation.
English 53