Zone Control - Kenwood DDX919WS Instruction Manual

Controlling Audio

Zone Control

You can select different sources for front and
rear positions in the vehicle.
1
Press the [MENU] button.
h Popup menu appears.
h
2
Touch [Audio].
h Audio screen appears. h
3
Touch [Zone Control].
h Zone Control screen appears.
h
4
Touch [Zone Select].
5
Touch [Dual Zone].
6
Set each source as follows.
78
[Zone Select]
■
Touch [Single Zone] to turn off the dual
zone function.
[[Front Source], [Rear Source]
■
Select an audio source for each.
Rear Source;
"AV-IN"/"DISC"/"iPod"/"USB"/"OFF"
[Rear VOL.]
■
Adjust the rear source volume.
NOTE
• When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
• When the dual zone function is set to on, the
following functions are not available.
– Output from the subwoofer
– Subwoofer Level/Bass Boost (P.79)
– Equalizer Control/Sound Effect/Listening
Position (P.76, 79, 80)
– Speaker Setup (P.74)
– High-resolution Sound Source File Playback
• You cannot select AV-IN if the AV-IN input
terminal is used for camera.
• You cannot select iPod if it is connected via
Bluetooth.
• If you select Radio, USB, iPod, Disc (Music CD/Disc
media), Spotify or Bluetooth audio as the Front
Source, you cannot select USB, iPod, DISC (Music
CD/Disc media) as the Rear Source.
• If you select Wireless Mirroring, Apple CarPlay or
Android Auto as the Front Source, you cannot
select DISC (Music CD/Disc media), USB or iPod as
the Rear Source.