Selecting A Location; Stand Mount - VeriFone MX800 Series Installation Manual

Selecting a
Use the following guidelines to select a location for the MX800 Series terminal.
Location
1
WARNING
The MX800 Series terminal is designed for indoor use only.
2
•
•
•
•
3
WARNING
Do not use the MX800 Series terminal near water, including a bathtub, wash
bowl, kitchen sink, or laundry tub. Do not use in a wet basement or near a
swimming pool.
4

Stand Mount

In most retail spaces, the terminal is positioned on a stand mount. To install the
terminal on the stand mount:
1
2
3
4
5
Select a location for the terminal that offers adequate ventilation and
protection and is convenient for the user and merchant.
Place the MX800 Series terminal on a flat surface, such as a table or
countertop, or mount it on a mounting stand supplied by VeriFone.
Avoid areas with:
Excessive heat or dust
Oil or moisture
Devices that cause excessive voltage fluctuations or electrical noise, such
as air conditioners, fans, electric motors, neon signs, or high-frequency
security devices
Direct sunlight or objects that radiate heat
Position the terminal conveniently in relation to power and ECR or LAN
connections.
Before connecting the terminal to the power pack, complete the installation
by connecting all the cables (see
the Multiport Cable).
Install the stand mount on the countertop in the desired lane over an
appropriate hole through which the wiring connections can be threaded.
Thread all wiring connections through the center of the stand mount.
Make all wiring connections.
Attach the cable tie-down strap with the supplied screw.
Align and seat the three pins on the top plate of the stand mount platform with
the three key-hole slots on the bottom of the terminal
Connecting the Device
(Figure
MX800 S
ERIES
and Power Up with
2).
I G
NSTALLATION UIDE
9