Pin Protection Measures - VeriFone MX800 Series Installation Manual

PIN Protection
Measures
10
MX800 S I
ERIES NSTALLATION
6
Slide the terminal down until the unit seats securely.
Figure 2 Aligning MX800 Series Terminal with the Typical Mounting
Plate
The following techniques can be employed to provide for effective screening of
the PIN-entry keypad during the PIN entry process. These methods would
typically be used in combination, though in some cases a method might be used
singly.
•
Positioning of terminal on the check-stand in such a way as to make visual
observation of the PIN-entry process infeasible. Examples include:
•
Visual shields designed into the check-stand. The shields may be solely
for shielding purposes, or may be part of the general check-stand design.
•
Position the PED so that it is angled in such a way that PIN spying is
difficult.
•
Installing PED on an adjustable stand that allows consumers to swivel the
terminal sideways and/or tilt it forwards/backwards to a position that makes
visual observation of the PIN-entry process difficult.
•
Positioning of in-store security cameras so that the PIN-entry keypad is not
visible.
The following table describes the two preferred mounting methods and the
recommended measure to protect from PIN capture in four observation corridors:
G
UIDE