Installing I/O Modules - VeriFone MX800 Series Installation Manual

Installing I/O
Modules
NOTE
12
MX800 S I
ERIES NSTALLATION
3
Route the multiport cable through the races in the countertop wedge or
through the races underneath the wedge.
Figure 4 Installing the Countertop Wedge
.
Use the following steps to install optional I/O modules:
The retaining screws are captive, which means they do not actually separate
from their seats, but only from the mounting hole.
1
Loosen the module retaining screw on the bottom of the terminal
until the old module can slide out.
Figure 5 Removing the old I/O Module
G
UIDE
(Figure 5)