Step Three: Attach Gun Hose To Pump; Step Four: Attach Hose Guide To Frame And Install Hose Hooks - North Star M2681781B Owner's Manual

Step Three: Attach gun hose to pump

1. Install hose clamp on hose.
i) Slide hose clamp over the end of
the hose.
ii) Push the hose onto the hose barb.
iii) Slide the hose clamp over the
hose barb.
iv) Tighten the hose clamp.
2. Attach one end of the gun hose to the
pump hose barb.

Step Four: Attach hose guide to frame and install hose hooks

1. Route gun hose through hose guide.
2. Thread nuts onto hose hooks as shown
3. Align the hose guide to the hole in frame – Note orientation
4. Fasten hooks to frame with 2 nuts – Note orientation
5. To secure the hose, wrap it around the hooks
Assembly (continued)
Hose
clamp
Hose
hooks
12
Hose
guide
Nuts
Gun
hose