North Star M2681781B Owner's Manual page 28

Operation - Using the Sprayer (continued)
4. Close broadcast
nozzle shut off
valve
5. Turn on power
6. Squeeze trigger &
adjust nozzle
Turn the broadcast nozzle shut off valve to the closed position.
Turn on the power to the sprayer.
1.Verify the remote switch is connected to the pump power cord.
2.Turn the remote switch to the "ON" position.
Note: The pump will start automatically when power is turned on. The
pump will cycle on and off as needed to retain pressure in the hose.
To spray, squeeze the gun trigger.
- Twist the spray nozzle to adjust from a straight stream to hollow
cone spray pattern, as recommended on the chemical label for proper
delivery rate.
Note: It is not unusual for the operator to be exposed to chemical drips
while adjusting the nozzle – wear chemical resistant gloves.
28
Broadcast
nozzle shut
off valve
Retaining nut
Spray nozzle