Step Five: Attach gun hose to spray gun
Install hose clamp on hose.
1.
i) Slide hose clamp over the end of the hose.
ii) Push the hose onto the hose barb.
iii) Slide the hose clamp over the hose barb.
iv) Tighten the hose clamp.
2. Attach the end of the gun hose to the gun hose barb.
Spray gun
Step Six: Attach broadcast nozzle
1. Insert anti-drip nozzle filter into 11/16" x 1/2" Hose barb – Note orientation
2. Thread larger 11/16" side of nozzle coupler onto 11/16"x 1/2" Hose barb
3. Thread broadcast nozzle into smaller 1/4" side of nozzle coupler
Assembly (continued)
Gun hose
nozzle filter
13
Hose barb
Hose clamp
11/16" x 1/2" hose barb
(already installed)
Anti-drip
Nozzle
coupler
Broadcast
nozzle