Step Three: Attach Gun Clips; Step Four: Install Gun Fitting; Step Five: Attach The Spray Gun To The Gun Hose - North Star M2827271A Owner's Manual

Step Three: Attach gun clips

Attach the gun clips to the sprayer assembly with the gun clip screws.

Step Four: Install gun fitting

Remove the shipping plug and replace with gun fitting. Hand tighten, then 2 turns with wrench.

Step Five: Attach the spray gun to the gun hose

1. Attach the gun hose to the gun fitting with a hose clamp. (Follow hose clamp instructions below.)
2. Attach the gun hose to the spray gun with a hose clamp. (Follow hose clamp instructions below.)
3. Wrap the gun hose around the hose wrap.
Spray gun
Hose clamp
Hose clamp installation instructions:
1. Slide hose clamp over the end of the hose.
2. Push the hose onto the hose barb.
3. Slide the hose clamp over the hose barb.
4. Tighten the hose clamp.
Assembly (continued)
Gun clip
Gun clip screw
12
Gun fitting
Shipping plug
Hose clamp
Gun hose