North Star M2681781B Owner's Manual page 26

Operation - Using the Sprayer (continued)
5. Remove fill Remove the fill cap located on top of the sprayer.
cap
6. Ensure tank Ensure tank is flushed of all chemicals from prior uses.
flushed - Chemicals can interact dangerously when mixed, and residue chemicals are also a
health hazard.
7. Fill tank Add pesticide to tank through fill cap:
8. Ensure Ensure chemical is thoroughly mixed in tank.
chemical - Stirring device should be made of metal or plastic, non-chemical absorbing
mixed material, and then properly cleaned and stored after use.
Replace fill cap and tighten securely.
9. Replace fill
cap
Fill cap
a) Confirm the chemical/water dilution ratios specified on the chemical label.
b) Determine chemical and water volumes needed for the planned application,
taking into consideration that maximum tank capacity is 55 gallons
Note: Only purchase and mix as much chemical as you need for the planned
application in order to minimize chemical over application and the need for
storing unused chemicals.
c) Add chemical to the tank through the fill cap.
If the chemical is not pre-mixed, add water and pesticide concentrate in the
order prescribed on the label.
26