Using The Cycle Print Mode - Kodak 3000 DV Plus User Manual

Using the Cycle Print
mode
3-16
Centering
• Press the Centering/Fit key to turn on Centering.
Centering/Fit
NOTE: Centering/Fit mode cannot be used if Masking is selected.
Fit
• Press the Centering/Fit key to turn on Fit.
Centering/Fit
NOTE: Fit mode cannot be used when the scanner is connected to the
PC.
This function automatically scans the next image following a preset
period of time. Images are manually loaded on the carrier glass in
between cycles.
Cycle Print mode is a system setting that must be entered by an Kodak
Service Representative.
This function is only available in the PR mode.
A-61371 April 2010