Kodak 3000 DV Plus User Manual page 63

5-4
5. Insert the new projection lamp so that the mark on its base is facing
upwards. Make sure that the new projection lamp is inserted
securely so there is no gap between the projection lamp and the
lamp socket.
CAUTION: Do not touch the reflector mirror surface of the
projection lamp. Fingerprints, smudges or debris
should be wiped clean with a soft, dry cloth.
6. Insert the projection lamp all the way into the lamp holder of the
projection lamp unit.
7. Slide the projection lamp unit securely back into place.
Mark
A-61371 April 2010