Kodak 3000 DV Plus User Manual page 69

System Setting
Fine mode contrast select
Auto Skew Correction
Retain
Machine ID Printing
(PR mode only)
Cycle Print mode
(PR mode only)
Paper Size of Paper
Feeding tray
(PR mode only)
Contrast setting
The print function at the
time of Toner Empty or
Toner Cartridge life
detection (PR mode only)
Auto Film Format Select
Print function
(PR mode only)
90 degree rotation setting
B-2
Selection Initial
Setting
Contrast *
Emphasis
Outline Emphasis
Retained *
Not Retained
Disabled *
Pattern 1
Pattern 2
Enabled *
Disabled
Same as the setting for U4 of
the User mode.
Lighter *
Normal
Darker
• Empty>Disable *
• Print Life>
Disable Print
• Empty>Enable
Print Life>
Disable Print
• Empty>Enable
Print Life>
Enable Print
Enable *120V
Disable *200V
Enable
Disable *
Description
Applies the following functions as required:
Contrast Emphasis: applied when film contains text
that is poorly contrasted against its background
making it difficult to read.
Outline Emphasis: applied when film contains blurred
black-and-white images.
Determines whether or not to retain the original
(uncorrected) skew of a screen image after the print
has been made.
When two scanners are connected to one printer, this
function leaves an identification marker on the print so
the scanner used for the job can be determined after
printing.
Pattern 1
Paper
This function automatically scans the next image
following a preset period of time (the period can be set
by your Kodak Service Representative). Images are
set by the user onto the carrier glass in between
cycles.
Determines the desired paper size and orientation
from the paper feeding tray of the printer.
To view subtle images with standard ranges of density
clearly: Light (-1 to -7). To bring out the darker and
lighter ranges of an image: Dark (+1 to +7).
After a toner empty condition or toner cartridge life is
detected, you can select to Stop or Continue printing.
NOTE: When the selection of Enable Print after the
toner cartridge life fulfillment has been
reached, TE will be displayed while pressing
the Start key.
The Auto Format Select Print function is enabled or
disabled through the control panel.
Enables the prism to rotate the screen image 90
degrees.
Pattern 2
Paper
A-61371 April 2010