Solving Printing Problems - Kodak 3000 DV Plus User Manual

Solving printing
problems
Symptom
Light image
Dark image
Partial void image
Uneven image density
Blank print
6-2
Call your Kodak Service Representative if one of the following codes is displayed.
Display Location
Scanner
Printer
Scanner
Printer
Scanner PC
Use the following procedures to fix minor printing problems. If print
quality does not improve after implementing the procedures below,
contact your Kodak Service Representative.
Cause
Print density is not properly set.
Toner in the toner cartridge is running
out.
Print density is not properly set.
The paper in the tray is damp.
Toner in the toner cartridge is not evenly
distributed.
The printer has malfunctioned.
Code
C1 Optical path switch failure
C2 A scanner malfunction
C3 A condenser lens motor malfunction
Shading correction malfunction
C4 A fan motor malfunction
C5 Imperfect auto focusing
C6 A fusing unit malfunction
C7 A LED malfunction
C8 A polygon motor malfunction
C9 A main drive motor malfunction
CA A fan motor malfunction
C6 A communication malfunction (printer)
CL A printer clock malfunction
CC A communication malfunction (PC)
Change the print density setting as
necessary.
Replace the toner cartridge with a new one.
Change the print density setting as
necessary.
Replace the damp paper with fresh, dry
paper.
Remove the toner cartridge, shake it
several times and replace.
Contact your Kodak Service
Representative.
Description
Action
A-61371 April 2010