Kodak 3000 DV Plus User Manual page 70

System Setting
Automatic paper source
switching
A-61371 April 2010
Selection Initial
Setting
Auto switching *
Disable Auto
switching
* To change any of the system settings described above, contact your
Kodak Service Representative.
Description
Allows you to specify the paper source when lettersize
or A4 paper is loaded in lengthwise or crosswise
orientations in the paper feed tray and the paper
cassette.
Auto switching: printing continues by automatically
switching to the remaining paper source after paper in
the specified paper source runs out.
Disabling Auto switching: a Paper Empty mode
occurs and printing stops after paper in the specified
paper source runs out. The paper source must be
refilled or the paper source must be switched by
pressing the Output Selection key to resume printing.
B-3