Rear Panel - Roland VC-1-SC Owner's Manual

Panel Descriptions

Rear Panel

1.
DC IN jack/indicator
Connect the included AC Adaptor. The indicator lights up when the VC-1-SC is receiving power.
2.
REF IN connector/indicator
Connect a clock source device for synchronization.
* It is possible to use this unit as a frame synchronizer when supported sync signal is input.
3.
SDI OUT connector/indicator
Connect a video deck, monitor, or other SDI input equipment.
4.
SDI IN/OUT connector/indicator
This functions as input when SDI input has been selected and as output at other times.
When using this for input, connect a video camera or other SDI source equipment.
When using this for output, connect a video deck, monitor, or other SDI input equipment.
5.
HDMI OUT connector/indicator
Connect a TV monitor or other HDMI input equipment.
14
1 2 3 4 5