Connecting A Computer For Remote Control - Roland VC-1-SC Owner's Manual

Connecting External Equipment
Connecting audio output equipment
Connect powered speakers or the like to the AUDIO OUT jacks.

Connecting a Computer for Remote Control

Connect a computer for remote control to the USB port.
* Operating the VC-1-SC by remote control requires downloading of the dedicated software
(VC-1 RCS) and installing it on a computer. You can download the dedicated software from the
following Roland website.
http://www.rolandsystemsgroup.net/
The VC-1 RCS enables you to make detailed settings that cannot be made using the unit's mode
switches. The values of the settings are saved to the unit's internal memory. You can use such
saved settings even when you are using the unit alone, without connecting a computer.
24
Set MODE SW 1 (p. 25) to "ON" to
switch to AUDIO OUT jacks.