Top Cover - HP PAVILION DV3 Maintenance And Service Manual

Top cover

Description
Top cover (includes TouchPad and cable, fingerprint reader board cable, and caps lock LED board
and cable)
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard and switch cover (see
d. Display assembly (see
Remove the top cover:
1. Turn the computer upside down.
2. Remove the seven Phillips screws that secure the top cover to the computer.
3. Turn the computer right-side up, with the front toward you.
4. Open the computer as far as possible.
5. Disconnect the caps lock LED board cable (1) from the system board.
Battery on page 32).
Hard drive on page 38)
Optical drive on page
Keyboard and switch cover on page
Display assembly on page
35)
43)
Component replacement procedures
Spare part number
506241-001
40)
49