Display Assembly - HP PAVILION DV3 Maintenance And Service Manual

Display assembly

Description
13.3-inch, WXGA BrightView display assembly (includes camera/microphone module, camera/
microphone module cable, 2 microphones, and 3 wireless antenna transceivers and cables)
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Disconnect the wireless antenna cables from the WLAN module (see
6. Remove the keyboard and switch cover (see
Remove the display assembly:
1. Close the computer.
2. Turn the computer upside down.
3. Pull the WLAN antenna cables (1) down through the channel (2) located between the base
enclosure (3) and the top cover on the opposite side.
4. Turn the computer right-side up.
5. Open the computer as far as possible.
6. Remove the WLAN antenna cables (1) from the clips and routing channel built into the top cover.
Battery on page 32).
Keyboard and switch cover on page
Spare part number
506155-001
WLAN module on page
Component replacement procedures
33).
40).
43