Speakers - HP PAVILION DV3 Maintenance And Service Manual

Speakers

Description
Speakers
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Optical drive (see
b. Hard drive (see
c. Keyboard and switch cover (see
d. Display assembly (see
e. Top cover (see
f. System board (see
Remove the speakers:
1. Disconnect the speaker cable from the system board (1).
2. Remove the two Phillips PM2.5×4.0 screws (2) that secure the speakers to the base enclosure.
3. Remove the speakers from the base enclosure (3).
Reverse this procedure to install the speakers.
54 Chapter 4 Removal and replacement procedures
Battery on page 32).
Optical drive on page
Hard drive on page 38)
Keyboard and switch cover on page
Display assembly on page
Top cover on page 49)
System board on page
35)
43)
52)
Spare part number
506955-001
40)