Channel Skip; Channel Label; Watching Television - Audiovox AVE9103 Owner's Manual

Channel Skip

1. Press TV MENU button.
2. Use the or button to select TV.
3. Use the or button to select Channel Skip.
4. Press the button to enter.
5. Press the or
6. Press the button to select the last channel of the page; press again
to go to the next page. Press the
of the page; press again to return the previous page.)
7. Press the ENTER button to shift between On / Off. (Select On to skip
the selected channel. )
8. Press the TV MENU button to return to the previous menu.
9. To exit the MAIN MENU and return to the normal screen, press the EXiT button on the remote control.

Channel Label

You can edit a label for each channel.
1. Press TV MENU button.
2. Use the or button to select TV.
3. Use the or button to select Channel Label.
4. Press the button.
5. Use the or button to select the number or letter. Use the
button to move and edit the next character.
6. Press the ENTER button to confirm.
7. After editing, the Channel and Channel Label will be shown on the
screen when you press the DiSPLAy button.

Watching Television

Viewing a television station after the auto/manual search for channels.
1. Press the fUNCTiON button to TV mode.
2. Press the CH buttons to select a channel, or press the number button
on the remote control to select the channel you want to watch. Or you
may press the ENTER button to show the Channel List, then use the
or button to select a previous or next channel.
• For channels 1 to 9, enter one-digit channel number.
• For channels 10 to 99, enter the two-digit channel number.
• For channels 100 or over, enter three-digit channel number.
NOTE:
• When a channel is selected, the channel number is displayed in the top right corner of the screen. This
number will disappear after a few seconds.
• When MUTE is pressed, the sound is mute and the "
MUTE is pressed again or VOL is pressed.
ATSC TV mode:
Press the DiSPLAy button, the upper window will pop up,
then press the DiSPLAy button again, the lower window will
pop up. Press the DiSPLAy button once to exit.
NTSC TV mode:
Press the DiSPLAy button, the below window will pop
up, then press the DiSPLAy button once to exit.
USiNG THE TV
button to select a channel.
button to select the first channel
or
" indicator always blinks on the LCD display until
5.1 CC OFF
HD 1920xX1080i Audio 1/2
2009/07/31 07:00 AM 07:00 AM-07:30 AM
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx x
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
E - 24
Picture Audio Time Setup
Select Adjust
Picture Audio Time Setup
X
Select Adjust
xxxxxxxxxxxxxxxx
TV
MENU Return
TV
MENU Return
x
TV-PG /
Bad