Listening To The Radio - Audiovox AVE9103 Owner's Manual

Tuning in to a Station Manually
1. Press the DVD/TV/RADiO button (the fUNCTiON button on the remote
control) until the radio frequency appears on the front panel display.
2. Press the AM/fM button to select AM or FM.
3. Press the TUNiNG
a desired station.
When MUTE is pressed, the sound is mute and the "
•
always blinks on the LCD display until MUTE is pressed again or VOL
is pressed.
FM Stereo
Press the MTS button on the remote control until "
front panel display.
Weak FM stations
Press the MTS button on the remote control until "
front panel display. Background noise will be reduced. To restore stereo
reception, press the MTS button on the remote control to select "
Searching for a Station Automatically
• Press and hold the
the remote control until the tuner starts searching for a station, then release. After tuning in a station, the
search stops.
• The search may not stop at a station with a very weak signal.
Presetting Stations
The unit can store a total of 60 stations in memory (30 FM, 30 AM). Presetting allows you to tune in to a
station directly.
1. Press the DVD/TV/RADiO button (the fUNCTiON button on the remote control) to RADIO.
2. Press the AM/fM button to select AM or FM.
3. Press the MEMORy button on the remote control – the unit will display a station preset number. If you wish
to pick a different preset number, simply enter the desired number.
• For preset numbers 1 to 9, simply press the number button on the remote control.
• For preset numbers 10 to 30, enter the two-digit numbers.
• For example, to enter 18 by pressing "1" & "8".
4. Press the MEMORy button again on the remote control.
5. Repeat steps 2-4 to store other stations.
Tuning in to a Preset Station
1. Press the DVD/TV/RADiO button (the fUNCTiON button on the remote control) to RADIO.
2. Press the AM/fM button to select AM or FM.
PREV/
3. Press the
numeric buttons to enter the number of the preset station.
For Better Reception
FM: Fully unwind the FM antenna wire. Then extend the FM antenna wire and place it in the position that
sounds best.
AM: Fully unwind and rotate the loop antenna then position it for the best reception.
NOTE: Do not connect the FM antenna to an outside antenna.

LiSTENiNG TO THE RADiO

buttons on the remote control to tune in to
CH CH
/
button on the front panel or the
NEXT button repeatedly to select the number of the preset station or use the
" indicator
" appears on the
" appears on the
".
E - 28
TUNiNG
buttons on