Related Manuals for Audiovox FPE-1908DV
Summary of Contents for Audiovox FPE-1908DV
- Page 1 FPE1908DV 19” HD FLAT PANEL LCD TV/DVD COMBO OWNER’S MANUAL FOR ASSISTANCE CALL CUSTOMER SERVICE AT 1-800-645-4994 128-8329 OR VISIT US AT WWW.AUDIOVOX.COM E - 1 English P1-32.indd 1 6/11/2008 12:22:10 PM...
-
Page 2: Safety Precautions
SAFETy PRECAUTIONS WARNING: TO REDUCETHE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. -
Page 3: Important Safety Precautions
IMPORTANT SAFETy PRECAUTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including... -
Page 4: Table Of Contents
TABLE OF CONTENTS SAFETy PRECAUTIONS ... 2 IMPORTANT SAFETy INSTRUCTIONS ..3 TABLE OF CONTENTS ... 4 QUICK INSTALLATION ... 5 DISC FORMATS ... 6 ACCESSORIES ... 7 GETTING STARTED ... 7 REMOTE CONTROL REFERENCE GUIDE ... 8 - 9 UNIT REFERENCE GUIDE ... -
Page 5: Quick Installation
QUICK INSTALLATION When you turn on your television set for the first time, be sure to place it on a solid stable surface. To avoid danger, do not expose the TV to water, or a heat source (e.g. lamp, candle, radiator). -
Page 6: Disc Formats
This unit can playback: DVDS [8CM/12CM DISC] AUDIO CDS [8CM/12CM DISC] REGION MANAGEMENT INFORMATION Region Management Information: This unit is designed and manufactured to respond to the Region Management Information that is encoded on DVDs. If the region number printed on the DVD does not correspond to the region number of this unit, this unit cannot play that disc. -
Page 7: Accessories
PLEASE LOCATE THE INCLUDED ACCESSORIES. Remote Control ... x 1 AAA Batteries ... x 2 Specifications and appearance are subject to change without notice. GETTING STARTED USING THE REMOTE CONTROL • Point the remote control at the REMOTE SENSOR located on the unit. •... -
Page 8: Remote Control Reference Guide
REMOTE CONTROL REFERENCE GUIDE STANDBy / ON Button Press to turn ON the unit or put it in STANDBY (OFF) mode. 2. TV Button Press to switch to TV mode. DVD Button Press to switch to DVD mode. AV Button Press to switch to source connected to AV1 (composite) inputs. - Page 9 REMOTE CONTROL REFERENCE GUIDE 17. FUNCTION Button Press to switch between TV / AV In / YUV In / DVD / PC In. 18. LAST CH Button Press to switch repeatedly between the last two channels displayed. 19. MUTE Button Press to turn off the sound.
-
Page 10: Unit Reference Guide
UNIT REFERENCE GUIDE FRONT, LEFT & RIGHT SIDE VIEW 1) Color LCD Screen Button Press to turn the unit on and off. PLAy Button Press to start or resume playback of a disc. STOP Button Press to stop playing a disc. 5) MENU Button Press to enter and exit the TV menu. - Page 11 UNIT REFERENCE GUIDE BACK VIEW 14) AC Power Cord 15) VIDEO OUT Jack - AV OUT 16) AUDIO OUT Jacks (Left/Right) - AV 17) VIDEO IN Jack - AV IN 18) AUDIO IN Jacks (Left/Right) - AV IN 19) MONITOR/VGA Jack - PC IN English P1-32.indd 11 20) AUDIO Jack - PC IN 21) COMPONENT VIDEO IN Jacks (y/P...
-
Page 12: Connections
CONNECTING A TV ANTENNA/CABLE/SATELLITE To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - A cable system - A satellite system Connecting a Digital Antenna The tuner in this TV receives ATSC TV signals from an antenna. -
Page 13: Connecting Devices With A Composite
CONNECTING DEVICES WITH A COMPOSITE (yELLOW RCA-TyPE) VIDEO OUTPUT To connect A/V devices such as a VCR, video game system or camcorder: Connecting to a VCR / Video Game System / Camcorder Connect the AUDIO / VIDEO cable (not included) as shown. Make sure you connect the cable from the other equipment (AUDIO and VIDEO OUT) to this unit (AUDIO and VIDEO IN) Note: Please refer to the user manual for the other equipment for more information. -
Page 14: Connecting A High-Definition (Hd) Source
CONNECTING A HIGH-DEFINITION (HD) SOURCE High-Definition (HD) Devices with component video output must be connected to the YUV input. Connect the component video cable and audio cable (not included) as shown. Make sure you connect the component video cable and audio cable from the other equipment (COMPONENT VIDEO OUT and AUDIO OUT) to this unit (COMPONENT VIDEO IN and AUDIO IN - yUV IN). -
Page 15: Connecting An Audio Amplifier External Speaker
CONNECTING AN AUDIO AMPLIFIER/EXTERNAL SPEAKERS This connection allows you to use an audio amplifier and external speakers. Connect the AUDIO cable (not included) as shown. Make sure you connect the cable from the other equipment (AUDIO IN) to this unit (AUDIO OUT). -
Page 16: Installation
REMOVING THE BASE STAND WARNING: The LCD Display is very fragile, and must be protected at all times when removing the base stand. Be sure that nothing hard or sharp, or anything that could scratch or damage the LCD display, come in contact with it. Do NOT place pressure on the front of the unit at any time because the screen could crack. -
Page 17: Using Headphones
USING HEADPHONES • Turn down the volume before connecting headphones to the unit, then adjust the volume to your desired level. • When headphones are connected, no sound will come from the front speakers. Headphones (1/8” [3.5mm] diameter plug) Note: Avoid listening to sound at high levels for prolonged periods of time. -
Page 18: Tv Setup
Note: Some setting items on the menu screen may not activate depending on the mode selected (TV / AV in / YUV in / DVD / PC in). PICTURE MENU 1. Press the MENU button. 2. Press the button to enter PICTURE settings. 3. -
Page 19: Time Menu
TIME MENU 1. Press the MENU button. 2. Use the or button to select TIME, then press button to enter the TIME settings. 3. Use the button to select the options (OSD Duration, Sleep Timer, Time Zone or Day Saving Time). Adjust them using the button. -
Page 20: Parental Menu
PC Set Up (in PC mode only) Resolution : 1,440 x 900 max Refresh Frequency : 60Hz max H - Pos : Center the image by moving it left or right. V - Pos : Center the image by moving it up or down. - Page 21 Parental 1. Use the or button to select various Parental settings. Adjust them using the or press the button to go into the detailed settings. 2. Press the MENU button to return to the previous menu. 3. Repeat steps 1 - 2 to adjust other options. 4.
-
Page 22: Tv Menu
TV MENU (For TV Mode Only) 1. Press the MENU button. 2. Use the button to select TV, then press button to enter the TV settings. 3. Use the button to select the options (Antenna, Auto Scan, Auto Scan Add CH, Channel Skip, Channel No., Channel Label or DTV Signal). -
Page 23: Cd/Dvd Operation
CD/DVD OPERATION This owner’s manual explains the basic instructions of this unit. Some DVDs are produced to limit operation during playback. For example, many DVDs do not allow users to skip government warnings, or in some cases previews or other features. This is not a defect in the unit. Refer to the instruction notes of discs. -
Page 24: Fast Forward/Fast Reverse
CD/DVD OPERATION FAST FORWARD/FAST REVERSE 1. Press the SEARCH • Each time the SEARCH changes in the following sequence: 2. Press the PLAy button when you reach the desired point to resume playback at normal speed. SLOW-MOTION PLAy (DVD) 1. In Play mode, press the SLOW button is pressed, the speed of slow-motion playback changes in the following sequence: 2. -
Page 25: Special Functions
SPECIAL FUNCTIONS DISPLAy FUNCTION (DVD) While the disc is playing, press the DISPLAy button repeatedly to display information on operation status: LOCATING A SPECIFIC TITLE (DVD) If a DVD contains title numbers, you can locate a specific title by directly selecting a title number. -
Page 26: Repeat Playback
REPEAT PLAYBACK You can play a specific title or chapter repeatedly. (Title repeat, chapter repeat, A-B repeat) REPEATING A CHAPTER (DVD) You can play the same chapter repeatedly. 1. While the disc is playing, press the REPEAT button until the “ displays on the screen. -
Page 27: Dvd Programmable Playback
DVD PROGRAMMABLE PLAYBACK PROGRAMMABLE MEMORy The two types of programmed playback provided by this unit is title/chapter programmed playback. TITLE/CHAPTER PROGRAMMED PLAYBACK 1. Press the MEMORy button in PLAY mode. 2. Input the title (2 digits) and chapter (2 digits) by pressing the number buttons. (For example : 01 02, 02 05, 02 11) It will move to the next item automatically. -
Page 28: Video Setup
CUSTOMIZING THE DVD FUNCTION SETTINGS VIDEO SETUP 1. In STOP mode, press the SETUP button. 2. Press the button repeatedly until VIDEO SETUP appears. 3. Use the or button to select the option (Brightness or Contrast), then press the button. Use the or button to make adjustments, then press the ENTER button. -
Page 29: Maintenance
CLEANING THE DISC A defective or soiled disc inserted into the unit can cause sound to drop out during playback. Handle the disc by holding its inner and outer edges. • Do NOT touch the surface of the unlabeled side of the disc. •... - Page 30 TROUBLE SHOOTING GUIDE The picture is not • Clean the disc. clear • The disc is scratched. Severe hum or • The plugs and jacks are dirty. Wipe them with a cloth slightly noise is heard. • Clean the disc. The disc does not •...
- Page 31 Unit: INCH E - 31 English P1-32.indd 31 6/11/2008 12:22:32 PM...
- Page 32 Printed in china 811-319991W150 E - 32 English P1-32.indd 32 6/11/2008 12:22:32 PM...