Technical Specifications - NETGEAR CG3100Dv3 User Manual

Factory Default Settings (Continued)
Wireless Wireless communication
SSID name
Security
Broadcast SSID
Transmission speed
Country/region
RF channel
Operating mode
Data rate
Output power
Access point
Authentication type
Wireless card access list
1. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will
vary. Network conditions and environmental factors, including volume of network traffic, building materials
and construction, and network overhead, may lower actual data throughput rate.

Technical Specifications

The following table describes the technical specifications for the gateway.
Technical Specifications
Network protocol and
standards compatibility
Power adapter
Physical specifications
Environmental
NETGEAR Wireless Cable Gateway CG3100Dv3
Enabled
As shown on the product label.
WPA/WPA2
The default WPA/WPA2 passphrase is as shown on
the product label.
Enabled
Auto
EU
Auto
n, g, and b
Best
Full
Enabled
Open System
All wireless stations allowed
Data and Routing Protocols: TCP/IP, DHCP server and client, DNS relay, NAT
(many-to-one),
TFTP client, VPN pass through (IPSec, PPTP)
• Europe (input): 230V, 50 Hz, input
• All regions (output): 12 V DC @ 1.5A output 18W maximum or
12 V DC @ 2.5A output 30W maximum
• Dimensions: 7.5 by 3.8 by 1.4 in (195 by 112 by 33 mm)
• Weight: 0.65 lb (0.28 kg)
• Operating temperature: 32° to 140° F (0° to 40° C)
• Operating humidity: 90% maximum relative humidity, noncondensing
• Electromagnetic emissions: Meets requirements of: FCC Part 15 Class B.
Default Settings and Technical Specifications
49
1