Reserving An Ip Address For Dhcp Use - NETGEAR CG3100Dv3 User Manual

To configure LAN IP settings:
1. In the main menu, under Advanced, select
LAN IP.
2. Specify these settings:
• LAN IP Address: The factory default
setting is 192.168.1.1.
• Subnet Mask: The network number
portion of an IP address. Unless you are
implementing subnetting, use
255.255.255.0 as the subnet mask.
• DHCP Server: The Yes radio button is
selected by default so the gateway acts as
a DHCP server, providing the TCP/IP
configuration for all the computers
connected to it.
If you will assign IP addresses manually,
or you have another DHCP server on your
network, select the No radio button.
• Starting IP Address and Ending IP
Address: These fields specify the range
in the IP address pool.
• Max Users: The maximum number of
users on the network.
• DHCP Lease: See the following section,

Reserving an IP Address for DHCP Use

3. Click Apply to save your LAN settings
Reserving an IP Address for DHCP Use
To reserve an IP address for DHCP use, enter the DHCP server reservation settings for the
private LAN under DHCP Reservation Lease Info in the LAN Setup screen.
To reserve an IP address for DHCP:
1. Enter the MAC address of the computer for which you want to reserve an IP address.
2. Enter the permanent IP address for the computer.
3. Click Add to save your settings.
The MAC address and IP address are displayed in the DHCP Client Lease Info table. The
current system time is also displayed.
NETGEAR Wireless Cable Gateway CG3100Dv3
Advanced Settings
38
.