Before You Begin; Connecting The Components Of The Phone - Nortel 1120E User Manual

Before you begin

CAUTION
Damage to Equipment
Do not plug your IP Phone 1120E into a regular phone
jack. This results in severe damage to the IP Phone.
Consult your system administrator to ensure that you
plug your phone into a 10/100/1000BaseT Ethernet jack.
CAUTION
Your IP Phone 1120E is designed for use in an indoor
environment only.

Connecting the components of the phone

WARNING
Your IP Phone 1120E is shipped with the base locked in
position. To avoid damaging your phone, press the wall-
mount lever, located just under the Handsfree key as
indicated in
and pull it away from the phone.
Connecting the components
Figure 5 on page 30, to release the base
29