Overriding A Busy Signal; Using Forced Camp-On - Nortel 1120E User Manual

Using Forced Camp-on

Use the Forced Camp-on feature to automatically ring another IP Phone
(internal or external) immediately after that IP Phone disconnects from its
current call.
To use Forced Camp-on:
EnhOvr
or
Answering a call camped-on to your extension:
You receive a busy signal after dialing a
phone number.
1. Choose one of the following:
— Press the
— Enter the
Forced Camp-on.
Note: The person you called receives a
tone, and you receive a ring signal or a
busy signal, depending on the options
chosen. You are now camped-on to the
number you dialed.
2. Return the handset to the cradle.
3. When the person you called finishes the
call, your IP Phone automatically dials
the number and both IP Phones ring.
When your IP Phone rings, lift the
handset.
Note: You can program your IP Phone
for either Camp-on or Call Waiting, but
not both.
Additional call features
Override key.
Override FFC, to initiate a
137