Using Call Waiting - Nortel 1120E User Manual

Using Call Waiting

The Call Waiting feature alerts you to an incoming call by producing a
tone. It also puts the current call on hold while you answer the new call.
To answer an incoming call while on another call:
(Hold)
Z
CallWait
To return to the first IP Phone call:
(Hold)
or
(Goodbye)
3. Dial the DN of the IP Phone that is
ringing (and that is not in your call pickup
group). If the pickup DN or group
number is invalid (an overflow burst tone
sounds and the screen displays
Goodbye and try again), press the
Goodbye key.
1. When the incoming call tone sounds,
press the Hold
on hold.
Note: If Automatic Hold
not necessary to press the
2. Press the Call Waiting
1. Choose one of the following:
— Press the
second call on hold.
— Press the
second call.
Incoming calls
key to put the current call
is enabled, it is
Hold
key.
Hold key to put the
Goodbye key to end the
key.
115