Test Ground Strip Resistance; Test Cylinder Resistance - Graco OR PRO TI1681A Instructions-Parts List Manual

Test Ground Strip Resistance

See F . 22.. Using an ohmmeter, measure the resis-
IG
tance between the latch housing (206) and the ground
lug (214). The ground strip is grounded through the cart
back to the ground lug. Resistance must be less than
100 ohms. If greater than 100 ohms, replace the ground
strip (240).
206
Fig. 22. Test Ground Strip Resistance
309293J

Test Cylinder Resistance

See F
ohmmeter, measure the resistance from the pump (209)
to the ground lug (214). Resistance must be less than
100 ohms. If greater than 100 ohms, replace the
grounding cylinder.
214
TI2165A
Fig. 23. Test Cylinder Resistance
. 23.. Remove the enclosure door. Using an
IG
209
Electrical Tests
214
TI2164A
33