Sis Commands For Dxp; Symbol Definitions For Dxp - Extron electronics DXP DVI User Manual

SIS Commands for DXP

Symbol Definitions for DXP

]
}
•
E
X!
X@
X#
X$
X%
X^
X&
X*
X(
X1)
X1!
X1#
NOTE: The following characters are invalid or not recommended in the name:
X1$
X1%
= Carriage return and line feed
¦
or = Carriage return (no line feed)
= Space
or W = <Escape> key
NOTE:
Input and output numbers in commands may be entered as either one-digit, two-
digit, or three-digit numbers. All input and output numbers are reported as two-digit
numbers in the response.
= Input number
= Input number (for ties)
= Output number
= Lock mode, power,
supply or individual
mute status
= Group number (for I/O
grouping)
= Room number (for room
presets)
NOTE:
A room is a subset of operator-selected outputs that relate to each other. The DXP
switchers support up to 10 rooms, each of which can consist of from 1 to 16 outputs.
= Global preset number
= Room preset number
NOTE:
A room preset is a stored configuration with all of the outputs assigned to a single
room. When a room preset is retrieved from memory, it becomes the current
configuration.
= All video and audio mute
status
= HDCP status
= Connection status
= Name
{space} `
~ , @ =
= Total inputs
= Total outputs
DXP DVI, DXP DVI Pro, and DXP HDMI Series • SIS Configuration and Control
1 – maximum number of inputs for your model
0 – maximum number of inputs for your model
(0 = untied)
1 – maximum number of outputs for your model
0 = lock mode 0, not OK, or unmuted
1 = lock mode 1, OK, or muted
2 = lock mode 2
1 through 4 groups
0 = no group
10 maximum. Each room can have up to 10 room
X*
presets ( ) assigned.
00 – 32 (00 = current configuration)
00 – current ties for the room in view mode, 10
maximum
0 = no signals muted
1 = video muted
2 = audio muted
3 = video and audio muted
0 = No input or output is connected.
1 = Input or output is connected and is not HDCP
compliant.
2 = Input or output is connected and is HDCP
compliant.
0 = no input connected
1 = input connected
12 characters maximum for input, output, and global
preset names
11 characters maximum for room names
Upper- and lowercase letters are valid.
[ ] { } < > ' ' " " ; : | \ +
Total number of inputs for this switcher
Total number of outputs for this switcher
and
?
54