Password Setup - Planet WRT-625G User Manual

You can keep the default IP address or enter a new Time Server Address for this
Time Server Address device to synchronize its time. You can also refer to the web site
http://www.ntp.org to find a nearest time server.
The router can also take Daylight savings into account. Select the check box to
Daylight Savings enable your daylight saving configuration. You can set the days that you wish to
start and stop daylight Savings Time.
After the setup completed, please click "Apply" to save the settings. After press "Apply", you will see a
web screen to prompt you the configurations save successfully. You may refer to section 4.2.7 for the
information of this screen.
5.1.2

Password Setup

This screen allows you to change the management password.
Parameters
Current Password
New Password
Confirmed Password
After the setup completed, please click "Apply" to save the settings. After press "Apply", you will see a
web screen to prompt you the configurations save successfully. You may refer to section 4.2.7 for the
information of this screen.
Note: If you forget the password, please reset the WNRT-625G to the factory default by press
RST/WPS button (on WNRT-625G's rear panel) over 30 seconds.
Description
Enter your current password for the remote management administrator to
login to your Broadband router.
Enter your new password.
Enter your new password again for verification purposes.
29