Planet WRT-625G User Manual page 40

802.11n 3g broadband router

Table of Contents

5.4.1

Basic Settings

In this page, allows you configure wireless information, the detail information please following below

table.

2.4GHz (B): It forces the WNRT-625 to operate in 802.11b only.

2.4GHz (G): It forces the WNRT-625 to operate in 802.11g only.

2.4GHz (N): It forces the WNRT-625 to operate in 802.11n only.

Band

2.4GHz (B+G): It allows the WNRT-625 to operate in 802.11b and 802.11g

simultaneously.

2.4GHz (B+G+N): It allows the WNRT-625 to operate in 802.11b, 802.11g, and

802.11n simultaneously.

The ESSID (up to 32 printable ASCII characters) is the unique name identified in a

WLAN. The ID prevents the unintentional merging of two co-located WLANs.

SSID

Please make sure that the ESSID of all stations in the same WLAN network are the

same. The default value is "default".

Select the appropriate channel from the list provided to correspond with your

Channel Number

network settings. Channels differ from country to country.

Channel 1-11 (North America)

You may press "Show Active Clients" button to check the connected client

information. After the button pressed, you will see the dialog box as below.

Associated Clients

Table of Contents