Table of Contents
Advertisement
2.3
Network Setup
After you install your WNRT-625G, the TCP/IP settings should be set to obtain an IP address from a DHCP
server (WNRT-625G) automatically. To verify your IP address, please follow the steps below:
1.
Click on Start > Run.
2.
In the run box type "cmd" and click OK. (Windows VistaR users type cmd in the Start .Search box.)At the
prompt.
3.
Type "ipconfig" and press Enter. It will display the IP address, subnet mask, and the default gateway of
adapter.
11
Advertisement
Table of Contents
