Planet WRT-625G User Manual page 58

Parameters
Enable Virtual Server
Private IP
Private Port
Type
Public Port
Add
Reset
Current Virtual Server Table
Delete Selected
Description
Enable Virtual Server.
This is the LAN client/host IP address that the Public Port number packet will
be sent to.
Note: You need to give your LAN PC clients a fixed/static IP address for
Virtual Server to work properly.
This is the port number (of the above Private IP host) that the below Public
Port number will be changed to when the packet enters your LAN (to the
LAN Server/Client IP).
Select the port number protocol type (TCP, UDP or Both). If you are unsure,
then leave it to the default both protocols.
Enter the service (service/Internet application) port number from the Internet
that will be re-directed to the above Private IP address host in your LAN.
Note: Virtual Server function will have priority over the DMZ function if there
is a conflict between the Virtual Server and the DMZ settings.
Fill in the "Private IP", "Private Port", "Type", "Public Port" and "Comment" of
the setting to be added and then click "Add". Then this Virtual Server setting
will be added into the "Current Virtual Server Table" below. If you find any
typo before adding it and want to retype again, just click "Clear" and the
fields will be cleared.
Click "Reset" will clear your current settings to allows you to enter again.
If you want to remove some items from the "Current Virtual Server Table",
58