Planet WRT-625G User Manual page 23

Parameter
Obtain an IP address
Host Name
MAC Address
Use the following IP
address
IP Address
Subnet Mask
Gateway
User ID
Password
L2TP Gateway
MTU
Connection Type
Description
Select it if the ISP requires you to obtain an IP address by DHCP automatically.
If your ISP requires a Host Name, type in the host name provided by your ISP;
otherwise, just leave it blank.
To connect to the Internet, your ISP will require a MAC address from your PC.
Type in this MAC address in this section or use the "Clone MAC Address"
button to replace the WAN port MAC address with the MAC address of that PC.
Select it if the ISP provides you a static IP to connect to the L2TP server.
This is the IP address that your ISP has given you to establish a L2TP
connection.
Enter the Subnet Mask provided by your ISP (e.g. 255.255.255.0)
Enter the IP address of the ISP's Gateway.
Enter the User Name provided by your ISP for the L2TP connection.
Sometimes called a Connection ID.
Enter the Password provided by your ISP for the L2TP connection
If your LAN has a L2TP gateway, enter that L2TP gateway's IP address here. If
you do not have a L2TP gateway, enter the ISP's Gateway IP address above.
This is an optional parameter. You can specify the maximum size of
transmission packet to the Internet. The range of the MTU will be from 1492 to
512. You can also consult you ISP for the optimal MTU as well. Default: 1392
If you select "Continuous", the router will always connect to the ISP. If the WAN
23