Table of Contents
Advertisement
CDD-880 Multi Receiver Router
Ethernet Management
IP – Entry IP Address, format XXX.XXX.XXX.XXX;
MAC – Entry MAC Address, format YY:YY:YY:YY:YY;
Type (read-only) – Entry Type is identifiable as Static or Dynamic and cannot be edited.
Click [Submit Changes] once the desired edits have been made in this section.
5.4.4.4.5
Configuration | Routing
By using the 'Configuration | Routing (Routes)' page (Figure 5-13) static routes can be entered
to route IP traffic to another device on the local LAN.
Add New Route
This section allows the user to directly add a route entry using text boxes and drop-down menus
as described below for the Route Table (Edit) section.
Click [Add Entry] once all settings have been created in this section. Note that, when a new
route is added, the index automatically increments to the next available number.
Delete Route
Enter Route Index to Delete, then click [Delete Entry] once all changes have been made to this
section. The specified route entry will then be deleted from the route table.
Figure 5-12. Configuration | Routing (Routes) page
5–17
Revision 0
MN-CDD880
Advertisement
Table of Contents
