Table of Contents
Advertisement
CDD-880 Multi Receiver Router
Ethernet Management
The user defines two Community Strings for SNMP access:
•
Read Community
•
Write Community
5.4
Web Server (HTTP) Interface
The sections that follow describe the functionality of the CDD-880 Multi Receiver Router Web
Server (HTTP) Interface.
5.4.1 Web Server Introduction
The embedded Web Server application provides the user
with an easy to use interface to configure and monitor all
aspects of the CDD-880. These Web pages have been
designed for optimal performance when using Microsoft's
Internet Explorer Version 7.0 or higher (the examples shown use Internet Explorer Version 7.0).
The user can fully control and monitor base operations of the CDD-880 from the Web Server
Interface. By rolling the cursor over the navigation tabs located at the top of each page (right), the
user can select from the available nested tabs.
5.4.2 User Login
To initiate a Web session with the CDD-880 Multi Receiver Router, from the PC type
http://www.xxx.yyy.zzzz (where "www.xxx.yyy.zzz" represents the Management IP address of the
CDD-880 Multi Receiver Router) into the Address area of the Web browser:
The user is then prompted to type in a valid User Name and Password,
similar to the dialog box shown to the right. The default for both is
comtech. Type the User Name and Password, then click [OK].
Once the valid User Name and Password are
accepted, the user will see the CDD-880 Multi
Receiver Router Web Server Interface "splash"
page, similar to the example shown to the right:
default = public
default = private
5–3
Revision 0
MN-CDD880
Advertisement
Table of Contents
