Acura 2007 RDX Owner's Manual page 57

Main Menu
Table of Contents Table of Contents
TETHER STRAP
Remove the cargo area cover, and
1.
place it on the cargo area floor
(see page 167 ).
2. (Outer seating position)
After properly securing the child
seat (see page 51 ), lift the head
restraint, then route the tether
strap over the seat-back and
through the head restraint legs.
(Rear center seating position)
Remove the head restraint (see
page 146 ). Make sure the removed
head restraint is secured in the
cargo area. Reinstall the head
restraint when the child seat is
removed.
After properly securing the child
seat (see page 51 ), route the
tether strap over the top of the
seat-back.
When you install the child seat in
the rear center seating position,
you cannot use the seat belt
behind the driver's seat.
Installing a Child Seat
TETHER STRAP HOOK
Attach the tether strap hook to the
3.
anchor, making sure the tether
strap is not twisted.
4. Tighten the strap according to the
seat maker's instructions.
ANCHOR
53