Acura 2007 RDX Owner's Manual page 368

Main Menu
Table of Contents
Lights
5. Install the new bulb into the hole
and turn it one-quarter turn
clockwise to lock it in place.
6. Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Turn on the fog lights to test the
7.
new bulb.
8. Put the undercover in place.
Reinstall the clip, and tighten the
screw securely.
364
Replacing a High-mount Brake
Light Bulb
SCREWS
COVERS
1. Remove the two screw covers on
the light assembly by prying on
the side edge with a flat-tip
screwdriver.
2. Remove the screws with a Phillips-
head screwdriver, then remove
the light assembly from the
tailgate.
SOCKET
BULB
3. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
4. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.