Acura 2007 RDX Owner's Manual page 365

Main Menu
Table of Contents
Replacing Rear Bulbs
(in Tailgate)
COVER
NOTCH
Open the tailgate. Place a cloth on
1.
the edge of the light assembly
cover. Remove the cover by
carefully prying in the notch on its
middle edge with a flat-tip
screwdriver.
2. Determine which of the two bulbs
is burned out: taillight or back-up
light.
BULBS
Remove the socket by turning it
3.
one-quarter turn counterclockwise.
4. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
5. Turn on the lights to make sure
the new bulb is working.
6. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
7. Reinstall the light assembly cover.
SOCKETS
Lights
361