Acura 2007 RDX Owner's Manual page 52

Main Menu
Table of Contents Table of Contents
Installing a Child Seat
Rigid type
3. Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker's instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
48
Flexible type
Other LATCH-compatible seats have
a flexible-type connector as shown
above.
Whatever type you have, follow
4.
the child seat maker's instructions
for adjusting or tightening the fit.
5. Remove the cargo area cover, and
place it on the cargo area floor
(see page 167 ).
TETHER STRAP
6. Lift the head restraint (see page
146 ), then route the tether strap
through the legs of the head
restraint and over the seat-back,
making sure the strap is not
twisted.