PROBLEM
Unit doesn't prime
Unit primes but has no
or poor pressure
Unit does not maintain
good spraying pressure
Unit does not run
FIELD TROUBLESHOOTING
CAUSE
Airleak due to:
• Loose Suction Nut
• Worn O-Rings
• Leak in Siphon Assy
Stuck or Fouled Balls
Pressure set too low
Filter(s) are clogged
Outlet Valve fouled/worn
Prime valve
bypassing
Packings and/or piston worn
Blown spray tip
Packings and/or piston worn
Upper Seat worn
Circuit Breaker Tripped
Engine Oil Level Low
SOLUTION
• Tighten Suction Nut
• Service Suction Assy
• Replace Siphon Assy
Service outlet valve suction
assembly
Turn up pressure
Clean or replace gun filter, inlet
filter and/or manifold filter
Service outlet valve
Clean or replace prime valve
• Tighten packing nut
• Repack unit
Replace spray tip
Repack unit
Replace upper seat
Reset Breaker
Check Engine Oil Level
Place Machine On Level Surface
15