Setting The Advanced Video - Sherwood RD-8504 Operating Instructions Manual

RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오

SETTING THE ADVANCED VIDEO

PReP
BACK
Detail Enhancement
Edge Enhancement
Mosquito NR
Test Patterns
OSD Transparency
1.
Press the CURSOR UP/DOWN buttons to select the desired itme, then press the CURSOR RIGHT button to
enter its setting menu.
2.
Press the CURSOR UP/DOWN buttons to set the selected item as desired, then press the ENTER button.
• When the CURSOR LEFT button is pressed on a setting menu, the previous menu will be returned to.
• When adjusting the Detail Enhancement, the Edge Enhancement or the OSD Transparency, use the CURSOR UP/ DOWN
buttons only.
When selecting the PReP
• The PReP has an effect on the 576p or the 1080p video signals only.
Auto : To improve the progressive video signal automatically.
↕
Off : To turn off the progressive reprocessing.
When selecting the Detail Enhancement
• The detail enhancement can be adjusted within the range of -10 ~ + 10.
When selecting the Edge Enhancement
• The edge enhancement can be adjusted within the range of -10 ~ + 10.
When selecting the mosquito NR
• The Mosquito Noise Reduction applies filtering to the image noise that is caused by video compression processing to
remove the noise.
Off : To turn off the filtering.
↕
Low : Minimun filtering.
↕
High : Maximun filtering.
When selecting the Test Patterns
• You can select the desired among Off(no display), Frame Geometry, Bright/Contrast, Checker Board, Vertical Lines,
Horizontal Lines, Judder, Color8 Bars 75 and Color8 Bars 100.
■Note:
• The Horizontal Lines can be selected only when the progressive video signals (576p, 720p or 1080p) are output from the
HDMI MONITOR OUT.
When selecting the OSD Transparency
• You can adjust the transparency of OSD background as desired.
Low : To adjust the transparency low.
↕
Mid : To adjust it to mid level.
↕
High : To adjust high.
11:36 페이지 58
• PReP : To improve the progressive video signal by progressive
NEXT
reprocessing.
• Detail Enhancement : To enhance the entire picture by making
• Edge Enhancement : To enhance the picture by shapening object
• Mosquito NR : To remove the mosquito noise.
• Test Patterns : To select the desired test pattern.
• OSD Transparency : To adjust the tranparency of OSD
58
details stand out.
edges.
background.